DC7JH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DC7JH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1781631798	1002.1 hPa	24.3 C deg	1019 hPa	0 C deg
1781629984	1002.1 hPa	24.4 C deg	1019 hPa	0 C deg
1781628167	1002.2 hPa	24 C deg	1019.1 hPa	0 C deg
1781626352	1002.3 hPa	23.8 C deg	1019.3 hPa	0 C deg
1781624534	1002.5 hPa	23.6 C deg	1019.5 hPa	0 C deg
1781622719	1002.7 hPa	23.6 C deg	1019.7 hPa	0 C deg
1781620904	1002.9 hPa	23.1 C deg	1019.9 hPa	0 C deg
1781619089	1002.9 hPa	22.6 C deg	1020 hPa	0 C deg
1781617272	1003.1 hPa	22.4 C deg	1020.1 hPa	0 C deg
1781615456	1003 hPa	22.4 C deg	1020 hPa	0 C deg
1781613641	1003 hPa	21.7 C deg	1020.1 hPa	0 C deg
1781611826	1003.2 hPa	21.4 C deg	1020.3 hPa	0 C deg
1781610008	1003.5 hPa	21.3 C deg	1020.6 hPa	0 C deg
1781608222	1003.7 hPa	20.9 C deg	1020.8 hPa	0 C deg
1781606378	1003.9 hPa	20.9 C deg	1021 hPa	0 C deg
1781604563	1004 hPa	20.6 C deg	1021.2 hPa	0 C deg
1781602745	1004.3 hPa	20.2 C deg	1021.5 hPa	0 C deg
1781600930	1004.3 hPa	19.9 C deg	1021.5 hPa	0 C deg
1781599115	1004.5 hPa	19.7 C deg	1021.8 hPa	0 C deg
1781597299	1004.5 hPa	19.6 C deg	1021.8 hPa	0 C deg
1781595482	1004.5 hPa	19.6 C deg	1021.8 hPa	0 C deg
1781593667	1004.7 hPa	19.6 C deg	1022 hPa	0 C deg
1781591852	1004.6 hPa	19.7 C deg	1021.8 hPa	0 C deg
1781590037	1004.8 hPa	19.9 C deg	1022 hPa	0 C deg
1781544656	1000.4 hPa	21.8 C deg	1017.4 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)