IS0GQX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0GQX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1772592712	1007 hPa	14.8 C deg	76.5 %	46 -	0 C deg
1772590897	1007.5 hPa	15.1 C deg	75.2 %	46 -	0 C deg
1772587271	1008.9 hPa	15.6 C deg	71 %	48 -	0 C deg
1772585449	1009.3 hPa	15.6 C deg	71.1 %	47 -	0 C deg
1772583639	1008.1 hPa	15.8 C deg	69.3 %	49 -	0 C deg
1772580003	1009.2 hPa	15.4 C deg	73.1 %	45 -	0 C deg
1772578185	1009.5 hPa	15.6 C deg	70.9 %	47 -	0 C deg
1772576382	1009.3 hPa	15.6 C deg	71.3 %	46 -	0 C deg
1772574555	1009.1 hPa	16.1 C deg	66.9 %	48 -	0 C deg
1772572739	1008.5 hPa	15.9 C deg	69.2 %	46 -	0 C deg
1772570929	1008.1 hPa	15.8 C deg	70.8 %	45 -	0 C deg
1772569109	1008.3 hPa	15.8 C deg	70.9 %	44 -	0 C deg
1772567293	1008.4 hPa	15.8 C deg	70.8 %	44 -	0 C deg
1772563667	1007.7 hPa	15.9 C deg	70.3 %	44 -	0 C deg
1772560033	1007.2 hPa	15.8 C deg	71.7 %	42 -	0 C deg
1772556403	1006.7 hPa	16.2 C deg	69.5 %	43 -	0 C deg
1772554585	1007 hPa	16.9 C deg	68 %	42 -	0 C deg
1772550955	1007.2 hPa	18.3 C deg	62.9 %	41 -	0 C deg
1772547321	1007.3 hPa	20.4 C deg	55.8 %	41 -	0 C deg
1772545506	1007.3 hPa	20 C deg	57.3 %	41 -	0 C deg
1772543691	1007.5 hPa	19.7 C deg	59.8 %	39 -	0 C deg
1772541876	1008 hPa	20.9 C deg	55.8 %	39 -	0 C deg
1772540057	1008.2 hPa	19.7 C deg	59.7 %	39 -	0 C deg
1772538242	1008.6 hPa	19.9 C deg	59.8 %	38 -	0 C deg
1772536427	1008.7 hPa	20.7 C deg	55.4 %	39 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)