DB3KE-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB3KE-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1777353070	942.3 hPa	28.3 C deg	1013.6 hPa	0 C deg
1777351255	942 hPa	28.4 C deg	1013.4 hPa	0 C deg
1777349440	942.2 hPa	28.5 C deg	1013.5 hPa	0 C deg
1777347625	942.3 hPa	28.5 C deg	1013.7 hPa	0 C deg
1777345810	942.6 hPa	28.6 C deg	1013.9 hPa	0 C deg
1777343995	942.7 hPa	28.7 C deg	1014 hPa	0 C deg
1777342180	942.8 hPa	28.6 C deg	1014.1 hPa	0 C deg
1777340364	942.8 hPa	28.7 C deg	1014.1 hPa	0 C deg
1777338549	943 hPa	28.8 C deg	1014.3 hPa	0 C deg
1777336734	943.1 hPa	28.9 C deg	1014.3 hPa	0 C deg
1777334919	943.3 hPa	29 C deg	1014.5 hPa	0 C deg
1777333104	943.4 hPa	29.2 C deg	1014.6 hPa	0 C deg
1777331289	943.4 hPa	29.3 C deg	1014.6 hPa	0 C deg
1777329474	943.5 hPa	29.6 C deg	1014.7 hPa	0 C deg
1777327659	943.7 hPa	29.8 C deg	1014.8 hPa	0 C deg
1777325844	943.7 hPa	30 C deg	1014.7 hPa	0 C deg
1777324029	943.8 hPa	29.6 C deg	1015 hPa	0 C deg
1777322214	943.9 hPa	29.3 C deg	1015.1 hPa	0 C deg
1777320399	944 hPa	29.1 C deg	1015.2 hPa	0 C deg
1777318584	944.1 hPa	28.7 C deg	1015.5 hPa	0 C deg
1777316769	944 hPa	28.7 C deg	1015.4 hPa	0 C deg
1777314953	943.9 hPa	28.7 C deg	1015.3 hPa	0 C deg
1777313138	943.8 hPa	28.7 C deg	1015.2 hPa	0 C deg
1777311323	943.8 hPa	28.7 C deg	1015.1 hPa	0 C deg
1777309508	943.7 hPa	28.7 C deg	1015.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)