9A3DZK-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A3DZK-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780539971	12.83 Volt	60 Pkt	10 Pkt	94 Pcnt
1780538767	12.83 Volt	60 Pkt	10 Pkt	93 Pcnt
1780537566	12.83 Volt	50 Pkt	10 Pkt	96 Pcnt
1780536365	12.83 Volt	50 Pkt	10 Pkt	93 Pcnt
1780535163	12.83 Volt	60 Pkt	10 Pkt	95 Pcnt
1780533964	12.83 Volt	60 Pkt	10 Pkt	96 Pcnt
1780532762	12.83 Volt	60 Pkt	10 Pkt	100 Pcnt
1780530360	12.83 Volt	60 Pkt	10 Pkt	92 Pcnt
1780529158	12.83 Volt	60 Pkt	10 Pkt	92 Pcnt
1780527957	12.83 Volt	60 Pkt	10 Pkt	95 Pcnt
1780526755	12.83 Volt	60 Pkt	10 Pkt	97 Pcnt
1780525555	12.83 Volt	70 Pkt	10 Pkt	100 Pcnt
1780523152	12.83 Volt	120 Pkt	50 Pkt	95 Pcnt
1780521954	12.83 Volt	150 Pkt	70 Pkt	90 Pcnt
1780519549	12.83 Volt	120 Pkt	50 Pkt	91 Pcnt
1780518347	12.83 Volt	90 Pkt	30 Pkt	95 Pcnt
1780517146	12.83 Volt	100 Pkt	30 Pkt	95 Pcnt
1780515945	12.83 Volt	110 Pkt	40 Pkt	94 Pcnt
1780514744	12.83 Volt	130 Pkt	40 Pkt	94 Pcnt
1780513543	12.83 Volt	120 Pkt	40 Pkt	94 Pcnt
1780512342	12.83 Volt	110 Pkt	30 Pkt	95 Pcnt
1780511140	12.83 Volt	100 Pkt	20 Pkt	97 Pcnt
1780509939	12.83 Volt	90 Pkt	10 Pkt	98 Pcnt
1780508738	12.83 Volt	100 Pkt	10 Pkt	96 Pcnt
1780507537	12.83 Volt	110 Pkt	10 Pkt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)