DF6PC-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF6PC-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1776874023	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873970	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873958	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873925	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873867	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873864	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873807	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873807	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873741	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873739	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873722	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873685	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873591	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873584	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873539	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873518	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873490	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873474	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873453	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873447	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873409	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873284	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873284	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873251	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg
1776873162	1001.2 hPa	31.4 C deg	31.1 %	1022.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)