DL0BOD-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL0BOD-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1753607131	1003.6 hPa	31.6 C deg	30.2 %	1013.7 hPa	0 C deg
1753607116	1003.6 hPa	31.6 C deg	30.2 %	1013.7 hPa	0 C deg
1753605316	1004.2 hPa	31.6 C deg	30.3 %	1014.2 hPa	0 C deg
1753601747	1004.2 hPa	31.4 C deg	30.3 %	1014.3 hPa	0 C deg
1753601716	1004.2 hPa	31.4 C deg	30.3 %	1014.3 hPa	0 C deg
1753596339	1004.4 hPa	31.6 C deg	30.2 %	1014.4 hPa	0 C deg
1753596316	1004.4 hPa	31.6 C deg	30.2 %	1014.4 hPa	0 C deg
1753592723	1004.2 hPa	31.7 C deg	30.3 %	1014.2 hPa	0 C deg
1753592723	1004.2 hPa	31.7 C deg	30.3 %	1014.2 hPa	0 C deg
1753590923	1004.2 hPa	31.9 C deg	30.2 %	1014.3 hPa	0 C deg
1753590916	1004.2 hPa	31.9 C deg	30.2 %	1014.3 hPa	0 C deg
1753589122	1004.3 hPa	31.9 C deg	30.2 %	1014.4 hPa	0 C deg
1753587322	1004.3 hPa	32.1 C deg	30.1 %	1014.3 hPa	0 C deg
1753587316	1004.3 hPa	32.1 C deg	30.1 %	1014.3 hPa	0 C deg
1753585515	1004.3 hPa	32.1 C deg	30.2 %	1014.3 hPa	0 C deg
1753583715	1004.2 hPa	32.2 C deg	30.2 %	1014.3 hPa	0 C deg
1753581930	1004.4 hPa	32.4 C deg	30.1 %	1014.4 hPa	0 C deg
1753581915	1004.4 hPa	32.4 C deg	30.1 %	1014.4 hPa	0 C deg
1753580149	1004.5 hPa	32.4 C deg	30.2 %	1014.5 hPa	0 C deg
1753578319	1004.7 hPa	32.5 C deg	30.3 %	1014.7 hPa	0 C deg
1753571127	1005.2 hPa	33 C deg	30.4 %	1015.2 hPa	0 C deg
1753569324	1005.3 hPa	33.2 C deg	30.4 %	1015.4 hPa	0 C deg
1753569324	1005.3 hPa	33.2 C deg	30.4 %	1015.4 hPa	0 C deg
1753565715	1005.4 hPa	33.5 C deg	30.6 %	1015.4 hPa	0 C deg
1753562121	1005.4 hPa	33.8 C deg	30.8 %	1015.4 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)