DG2SEP-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG2SEP-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1781388243	1004.8 hPa	29.4 C deg	30.9 %	1020.5 hPa	0 C deg
1781386498	1004.8 hPa	29.2 C deg	31.1 %	1020.4 hPa	0 C deg
1781384603	1004.5 hPa	29.3 C deg	31 %	1020.2 hPa	0 C deg
1781382780	1004.2 hPa	29.3 C deg	31 %	1019.8 hPa	0 C deg
1781380966	1004 hPa	29.3 C deg	31 %	1019.6 hPa	0 C deg
1781379145	1003.6 hPa	29.3 C deg	31 %	1019.2 hPa	0 C deg
1781377355	1003.5 hPa	29.4 C deg	30.9 %	1019.2 hPa	0 C deg
1781375507	1003.5 hPa	29.4 C deg	31 %	1019.1 hPa	0 C deg
1781373751	1003.6 hPa	29.4 C deg	31 %	1019.2 hPa	0 C deg
1781371879	1003.4 hPa	29.5 C deg	31 %	1019 hPa	0 C deg
1781370083	1003.3 hPa	29.5 C deg	31 %	1018.9 hPa	0 C deg
1781366464	1003.5 hPa	29.7 C deg	30.9 %	1019 hPa	0 C deg
1781364638	1003.7 hPa	29.6 C deg	30.9 %	1019.3 hPa	0 C deg
1781362822	1003.8 hPa	29.4 C deg	31.2 %	1019.4 hPa	0 C deg
1781360998	1004.1 hPa	29.2 C deg	31.4 %	1019.8 hPa	0 C deg
1781359334	1004.2 hPa	29.1 C deg	31.4 %	1019.9 hPa	0 C deg
1781357379	1004.5 hPa	29.2 C deg	31.5 %	1020.1 hPa	0 C deg
1781355574	1004.8 hPa	28.9 C deg	32 %	1020.4 hPa	0 C deg
1781353735	1005 hPa	28.7 C deg	32.3 %	1020.6 hPa	0 C deg
1781351939	1005.2 hPa	28.6 C deg	32.3 %	1020.9 hPa	0 C deg
1781350096	1005.6 hPa	28.4 C deg	32.5 %	1021.3 hPa	0 C deg
1781348289	1005.7 hPa	28.1 C deg	32.8 %	1021.4 hPa	0 C deg
1781346515	1005.9 hPa	27.9 C deg	33.2 %	1021.6 hPa	0 C deg
1781344718	1006.2 hPa	27.8 C deg	33.4 %	1021.9 hPa	0 C deg
1781342843	1006.3 hPa	27.7 C deg	33.5 %	1022 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)