VE7ILZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7ILZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1789943789	63	63	67	33	40
1789941990	67	93	69	59	40
1789938388	67	66	69	33	39
1789936588	65	63	66	33	40
1789934787	64	63	67	33	39
1789932987	66	66	68	33	39
1789931186	63	63	66	33	39
1789929385	106	66	89	33	39
1789927584	61	65	69	33	39
1789923987	79	66	99	34	39
1789913181	79	67	69	47	40
1789904179	98	66	69	33	39
1789902379	82	97	70	33	39
1789900579	66	64	68	33	40
1789898778	63	64	68	33	40
1789896977	77	64	70	33	39
1789895178	63	63	66	33	40
1789893378	63	63	66	33	40
1789887976	62	62	66	33	40
1789886178	73	78	69	66	40
1789878974	63	63	68	33	39
1789869972	76	63	66	33	39
1789866371	72	64	68	33	39
1789862772	66	66	69	33	39
1789859591	80	66	70	33	39

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)