This is the latest recevied telemetry packets stored in our database for station/object DK6PR-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1765722884
998.7 hPa
25 C deg
39.4 %
1023.6 hPa
0 C deg
1765722884
998.7 hPa
25 C deg
39.4 %
1023.6 hPa
0 C deg
1765722796
998.7 hPa
25 C deg
38.6 %
1023.6 hPa
0 C deg
1765722796
998.7 hPa
25 C deg
38.6 %
1023.6 hPa
0 C deg
1765714346
999.6 hPa
25 C deg
41.1 %
1024.5 hPa
0 C deg
1765714287
999.7 hPa
25 C deg
41.4 %
1024.5 hPa
0 C deg
1765714287
999.7 hPa
25 C deg
41.4 %
1024.5 hPa
0 C deg
1765714143
999.7 hPa
25 C deg
41.3 %
1024.5 hPa
0 C deg
1765714143
999.7 hPa
25 C deg
41.3 %
1024.5 hPa
0 C deg
1765714118
999.7 hPa
25 C deg
41.3 %
1024.5 hPa
0 C deg
1765659145
1002.7 hPa
24.3 C deg
42.1 %
1024.6 hPa
0 C deg
1765659145
1002.7 hPa
24.3 C deg
42.1 %
1024.6 hPa
0 C deg
1765640206
1002.4 hPa
23.4 C deg
42.2 %
1024.3 hPa
0 C deg
1765640206
1002.4 hPa
23.4 C deg
42.2 %
1024.3 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)