VK2GJ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Psys*	Temp*	AirP*
1773283157	3.98 V	122 mW	33.7 degC	99250 Pa
1773282797	3.99 V	114 mW	33.8 degC	99250 Pa
1773282448	3.97 V	128 mW	34.6 degC	99262.5 Pa
1773282051	3.98 V	334 mW	38.4 degC	99250 Pa
1773282032	3.98 V	266 mW	37.9 degC	99250 Pa
1773269854	3.98 V	112 mW	30.7 degC	99225 Pa
1773269494	3.98 V	104 mW	29.8 degC	99225 Pa
1773269131	3.98 V	104 mW	30.4 degC	99212.5 Pa
1773268763	3.98 V	108 mW	30.2 degC	99225 Pa
1773268408	3.98 V	102 mW	30.2 degC	99225 Pa
1773268055	3.98 V	114 mW	30.8 degC	99212.5 Pa
1773267691	3.98 V	102 mW	30.1 degC	99212.5 Pa
1773267320	3.98 V	110 mW	30.2 degC	99212.5 Pa
1773266964	3.97 V	98 mW	29.6 degC	99187.5 Pa
1773266604	3.98 V	114 mW	30.4 degC	99187.5 Pa
1773266268	3.98 V	102 mW	29.9 degC	99187.5 Pa
1773265886	3.98 V	112 mW	30.2 degC	99187.5 Pa
1773265524	3.98 V	102 mW	29.3 degC	99187.5 Pa
1773265157	3.98 V	102 mW	29.8 degC	99175 Pa
1773264798	3.98 V	108 mW	29.9 degC	99175 Pa
1773264440	3.98 V	102 mW	29.9 degC	99175 Pa
1773264081	3.98 V	110 mW	30.1 degC	99175 Pa
1773263738	3.98 V	108 mW	31 degC	99162.5 Pa
1773263366	3.97 V	112 mW	30.3 degC	99150 Pa
1773263010	3.98 V	106 mW	30.4 degC	99137.5 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)