OZ5DIN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ5DIN-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761561004	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	9 count/10m
1761559804	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	10 count/10m
1761556204	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	1 count/10m	7 count/10m
1761555004	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	5 count/10m
1761553804	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	1 count/10m	10 count/10m
1761552604	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	9 count/10m
1761551405	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	9 count/10m
1761550204	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	1 count/10m	7 count/10m
1761549004	0.04 Rx Erlang	0.01 Tx Erlang	34 count/10m	1 count/10m	10 count/10m
1761547804	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	1 count/10m	8 count/10m
1761546604	0.05 Rx Erlang	0.02 Tx Erlang	38 count/10m	1 count/10m	16 count/10m
1761545404	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	0 count/10m	11 count/10m
1761544204	0.05 Rx Erlang	0.02 Tx Erlang	54 count/10m	0 count/10m	11 count/10m
1761543004	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	0 count/10m	17 count/10m
1761541804	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	1 count/10m	9 count/10m
1761540605	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	10 count/10m
1761539404	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	1 count/10m	12 count/10m
1761538204	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	9 count/10m
1761537004	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	11 count/10m
1761535804	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	9 count/10m
1761534604	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	1 count/10m	7 count/10m
1761533404	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	1 count/10m	8 count/10m
1761532204	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	9 count/10m
1761531004	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	10 count/10m
1761529805	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	9 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)