OE3RCB-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3RCB-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1762265873	1004.5 hPa	12.8 C deg	63 %	1028.9 hPa	0 C deg
1762264073	1004.5 hPa	12.7 C deg	63 %	1028.9 hPa	0 C deg
1762262273	1004.5 hPa	12.5 C deg	63.2 %	1028.9 hPa	0 C deg
1762260473	1004.6 hPa	12.4 C deg	63.3 %	1029 hPa	0 C deg
1762258673	1004.8 hPa	12.4 C deg	62.8 %	1029.3 hPa	0 C deg
1762256877	1005.1 hPa	12.3 C deg	62.4 %	1029.5 hPa	0 C deg
1762255073	1005.2 hPa	12.1 C deg	62.6 %	1029.7 hPa	0 C deg
1762253272	1005.5 hPa	11.8 C deg	63.2 %	1030 hPa	0 C deg
1762247872	1006.2 hPa	10.3 C deg	64.8 %	1030.8 hPa	0 C deg
1762208270	1004.9 hPa	10.4 C deg	64.4 %	1029.5 hPa	0 C deg
1762206470	1004.8 hPa	10.9 C deg	63 %	1029.3 hPa	0 C deg
1762204675	1004.9 hPa	11 C deg	62.9 %	1029.4 hPa	0 C deg
1762202872	1004.9 hPa	11.1 C deg	63.2 %	1029.5 hPa	0 C deg
1762201070	1004.8 hPa	11.3 C deg	63.1 %	1029.3 hPa	0 C deg
1762199273	1004.7 hPa	11.4 C deg	63.4 %	1029.1 hPa	0 C deg
1762197472	1004.5 hPa	11.8 C deg	62.6 %	1028.9 hPa	0 C deg
1762195670	1004.3 hPa	11.9 C deg	63.3 %	1028.7 hPa	0 C deg
1762192069	1003.9 hPa	11.9 C deg	64.8 %	1028.4 hPa	0 C deg
1762190274	1003.7 hPa	12 C deg	64.9 %	1028.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)