WA4TAL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA4TAL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*
1777604584	492 Pkts	455 Pkts	32 C
1777600984	481 Pkts	436 Pkts	33 C
1777597384	468 Pkts	429 Pkts	34 C
1777593784	462 Pkts	424 Pkts	33 C
1777590184	401 Pkts	363 Pkts	33 C
1777586584	400 Pkts	359 Pkts	32 C
1777582984	347 Pkts	308 Pkts	32 C
1777579384	359 Pkts	319 Pkts	32 C
1777575784	299 Pkts	259 Pkts	32 C
1777572184	399 Pkts	365 Pkts	32 C
1777568584	451 Pkts	414 Pkts	32 C
1777564984	436 Pkts	396 Pkts	32 C
1777561384	432 Pkts	392 Pkts	32 C
1777557784	480 Pkts	439 Pkts	32 C
1777554184	362 Pkts	321 Pkts	32 C
1777550584	367 Pkts	332 Pkts	32 C
1777546984	471 Pkts	431 Pkts	33 C
1777543384	413 Pkts	372 Pkts	33 C
1777539784	483 Pkts	444 Pkts	32 C
1777536184	612 Pkts	581 Pkts	32 C
1777532584	603 Pkts	566 Pkts	32 C
1777528984	532 Pkts	498 Pkts	33 C
1777525384	448 Pkts	412 Pkts	33 C
1777521784	396 Pkts	357 Pkts	32 C
1777518184	385 Pkts	352 Pkts	32 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)