DB3KE-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB3KE-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1773276534	1009 hPa	32.1 C deg	1021.3 hPa	0 C deg
1773274719	1008.8 hPa	32.1 C deg	1021 hPa	0 C deg
1773272904	1008.7 hPa	32.2 C deg	1020.9 hPa	0 C deg
1773271089	1008.4 hPa	32.4 C deg	1020.6 hPa	0 C deg
1773269271	1008.2 hPa	32.5 C deg	1020.4 hPa	0 C deg
1773267458	1007.8 hPa	32.4 C deg	1020 hPa	0 C deg
1773267456	1007.8 hPa	32.4 C deg	1020 hPa	0 C deg
1773265641	1007.5 hPa	32.4 C deg	1019.7 hPa	0 C deg
1773263826	1007.1 hPa	32.5 C deg	1019.3 hPa	0 C deg
1773262010	1006.8 hPa	32.5 C deg	1019 hPa	0 C deg
1773260195	1006.2 hPa	32.4 C deg	1018.4 hPa	0 C deg
1773258382	1005.8 hPa	32.4 C deg	1018 hPa	0 C deg
1773258380	1005.8 hPa	32.4 C deg	1018 hPa	0 C deg
1773256565	1005.2 hPa	32.3 C deg	1017.4 hPa	0 C deg
1773254746	1004.7 hPa	32.3 C deg	1016.8 hPa	0 C deg
1773252933	1004 hPa	32.3 C deg	1016.1 hPa	0 C deg
1773252931	1004 hPa	32.3 C deg	1016.1 hPa	0 C deg
1773251116	1003.3 hPa	32.3 C deg	1015.4 hPa	0 C deg
1773249301	1002.8 hPa	32.2 C deg	1015 hPa	0 C deg
1773247483	1002.3 hPa	32.3 C deg	1014.4 hPa	0 C deg
1773245668	1001.4 hPa	32.3 C deg	1013.5 hPa	0 C deg
1773243852	1001.1 hPa	32.4 C deg	1013.3 hPa	0 C deg
1773242039	1000.7 hPa	32.4 C deg	1012.8 hPa	0 C deg
1773242037	1000.7 hPa	32.4 C deg	1012.8 hPa	0 C deg
1773240224	1000.6 hPa	32.4 C deg	1012.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)