N3TCR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N3TCR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784692246	0.04 Rx Erlang	0.01 Tx Erlang	41 count/10m	0 count/10m	10 count/10m
1784691050	0.05 Rx Erlang	0.02 Tx Erlang	43 count/10m	0 count/10m	13 count/10m
1784689846	0.05 Rx Erlang	0.01 Tx Erlang	46 count/10m	10 count/10m	13 count/10m
1784688646	0.04 Rx Erlang	0.02 Tx Erlang	39 count/10m	2 count/10m	13 count/10m
1784687446	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	11 count/10m
1784686246	0.05 Rx Erlang	0.02 Tx Erlang	43 count/10m	5 count/10m	15 count/10m
1784685046	0.06 Rx Erlang	0.02 Tx Erlang	56 count/10m	6 count/10m	19 count/10m
1784683846	0.05 Rx Erlang	0.01 Tx Erlang	49 count/10m	1 count/10m	14 count/10m
1784682646	0.05 Rx Erlang	0.02 Tx Erlang	47 count/10m	1 count/10m	19 count/10m
1784681446	0.04 Rx Erlang	0.02 Tx Erlang	44 count/10m	0 count/10m	12 count/10m
1784680246	0.06 Rx Erlang	0.02 Tx Erlang	54 count/10m	6 count/10m	13 count/10m
1784679046	0.08 Rx Erlang	0.02 Tx Erlang	69 count/10m	14 count/10m	19 count/10m
1784677846	0.06 Rx Erlang	0.02 Tx Erlang	61 count/10m	7 count/10m	22 count/10m
1784676646	0.06 Rx Erlang	0.01 Tx Erlang	53 count/10m	8 count/10m	11 count/10m
1784675446	0.07 Rx Erlang	0.02 Tx Erlang	62 count/10m	16 count/10m	16 count/10m
1784674246	0.06 Rx Erlang	0.01 Tx Erlang	47 count/10m	12 count/10m	12 count/10m
1784673046	0.05 Rx Erlang	0.01 Tx Erlang	45 count/10m	4 count/10m	9 count/10m
1784671846	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	9 count/10m	18 count/10m
1784670646	0.06 Rx Erlang	0.02 Tx Erlang	58 count/10m	14 count/10m	14 count/10m
1784669463	0.06 Rx Erlang	0.02 Tx Erlang	50 count/10m	8 count/10m	13 count/10m
1784668246	0.06 Rx Erlang	0.02 Tx Erlang	53 count/10m	19 count/10m	14 count/10m
1784667046	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	2 count/10m	11 count/10m
1784665846	0.04 Rx Erlang	0.01 Tx Erlang	35 count/10m	0 count/10m	9 count/10m
1784664646	0.03 Rx Erlang	0.01 Tx Erlang	34 count/10m	0 count/10m	10 count/10m
1784663446	0.04 Rx Erlang	0.01 Tx Erlang	36 count/10m	1 count/10m	7 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)