W0BZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0BZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1774011823	690 Pkts	680 Pkts	174 Pkts	6 C
1774008222	414 Pkts	406 Pkts	151 Pkts	6 C
1774004622	394 Pkts	387 Pkts	164 Pkts	6 C
1774001022	372 Pkts	363 Pkts	150 Pkts	6 C
1773997423	402 Pkts	389 Pkts	152 Pkts	6 C
1773993823	396 Pkts	383 Pkts	152 Pkts	6 C
1773990223	387 Pkts	375 Pkts	148 Pkts	6 C
1773986622	456 Pkts	447 Pkts	226 Pkts	5 C
1773983022	628 Pkts	618 Pkts	274 Pkts	7 C
1773979422	667 Pkts	657 Pkts	248 Pkts	7 C
1773975822	611 Pkts	603 Pkts	242 Pkts	7 C
1773972222	993 Pkts	986 Pkts	384 Pkts	7 C
1773968622	886 Pkts	877 Pkts	320 Pkts	7 C
1773965022	604 Pkts	597 Pkts	243 Pkts	7 C
1773961422	583 Pkts	572 Pkts	213 Pkts	7 C
1773957822	529 Pkts	514 Pkts	185 Pkts	7 C
1773954222	580 Pkts	568 Pkts	237 Pkts	7 C
1773950622	438 Pkts	434 Pkts	169 Pkts	7 C
1773947023	531 Pkts	520 Pkts	210 Pkts	8 C
1773943422	668 Pkts	658 Pkts	343 Pkts	8 C
1773939822	733 Pkts	725 Pkts	352 Pkts	7 C
1773936222	576 Pkts	562 Pkts	276 Pkts	7 C
1773932622	616 Pkts	606 Pkts	287 Pkts	7 C
1773929022	626 Pkts	615 Pkts	258 Pkts	7 C
1773925422	708 Pkts	703 Pkts	204 Pkts	6 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)