HS5GDX-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5GDX-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	SUN*
1777606550	22 ug/m3	33 ug/m3	38 ug/m3	-33 dBm	13 %
1777605623	23 ug/m3	34 ug/m3	40 ug/m3	-34 dBm	18 %
1777604697	22 ug/m3	34 ug/m3	40 ug/m3	-34 dBm	16 %
1777603769	24 ug/m3	34 ug/m3	40 ug/m3	-34 dBm	19 %
1777602841	23 ug/m3	33 ug/m3	38 ug/m3	-33 dBm	22 %
1777601912	24 ug/m3	35 ug/m3	40 ug/m3	-33 dBm	23 %
1777600984	23 ug/m3	34 ug/m3	38 ug/m3	-33 dBm	17 %
1777600056	25 ug/m3	35 ug/m3	42 ug/m3	-33 dBm	12 %
1777599127	25 ug/m3	36 ug/m3	41 ug/m3	-33 dBm	17 %
1777598199	22 ug/m3	33 ug/m3	38 ug/m3	-32 dBm	11 %
1777597271	23 ug/m3	35 ug/m3	41 ug/m3	-32 dBm	11 %
1777596343	22 ug/m3	35 ug/m3	42 ug/m3	-33 dBm	14 %
1777595418	22 ug/m3	34 ug/m3	39 ug/m3	-34 dBm	11 %
1777594488	-	-	-	-	-
1777594487	23 ug/m3	34 ug/m3	40 ug/m3	-32 dBm	7 %
1777593557	22 ug/m3	32 ug/m3	34 ug/m3	-39 dBm	10 %
1777592628	21 ug/m3	31 ug/m3	35 ug/m3	-34 dBm	5 %
1777591701	21 ug/m3	32 ug/m3	36 ug/m3	-32 dBm	9 %
1777591286	22 ug/m3	32 ug/m3	37 ug/m3	-34 dBm	3 %
1777591152	22 ug/m3	33 ug/m3	37 ug/m3	31 dBm	2 %
1777590332	22 ug/m3	31 ug/m3	35 ug/m3	-33 dBm	4 %
1777589407	21 ug/m3	31 ug/m3	36 ug/m3	-32 dBm	7 %
1777588482	21 ug/m3	32 ug/m3	35 ug/m3	-33 dBm	3 %
1777587557	21 ug/m3	31 ug/m3	32 ug/m3	-33 dBm	3 %
1777586632	21 ug/m3	31 ug/m3	33 ug/m3	-33 dBm	3 %

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)