K1KPC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1KPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1788575065	14.25 Volt	180 Pkt	90 Pkt	100 Pcnt	50.5 C
1788574165	14.25 Volt	180 Pkt	90 Pkt	99 Pcnt	50.5 C
1788573265	14.25 Volt	180 Pkt	90 Pkt	98 Pcnt	50.5 C
1788572367	14.18 Volt	190 Pkt	100 Pkt	97 Pcnt	50.5 C
1788572365	14.18 Volt	190 Pkt	100 Pkt	97 Pcnt	50.5 C
1788571465	14.25 Volt	210 Pkt	110 Pkt	97 Pcnt	51 C
1788570567	14.25 Volt	220 Pkt	110 Pkt	96 Pcnt	51 C
1788570565	14.25 Volt	220 Pkt	110 Pkt	96 Pcnt	51 C
1788569665	14.25 Volt	220 Pkt	110 Pkt	97 Pcnt	51 C
1788568767	14.25 Volt	220 Pkt	110 Pkt	96 Pcnt	51 C
1788568765	14.25 Volt	220 Pkt	110 Pkt	96 Pcnt	51 C
1788567865	14.25 Volt	220 Pkt	110 Pkt	96 Pcnt	51.5 C
1788566965	14.18 Volt	210 Pkt	110 Pkt	98 Pcnt	51.5 C
1788566065	14.25 Volt	200 Pkt	110 Pkt	96 Pcnt	52 C
1788565165	14.25 Volt	190 Pkt	100 Pkt	94 Pcnt	52.5 C
1788564265	14.25 Volt	190 Pkt	90 Pkt	92 Pcnt	52 C
1788563365	14.25 Volt	190 Pkt	90 Pkt	88 Pcnt	52.5 C
1788562465	14.25 Volt	190 Pkt	90 Pkt	87 Pcnt	52.5 C
1788561565	14.25 Volt	180 Pkt	90 Pkt	86 Pcnt	53 C
1788560665	14.25 Volt	180 Pkt	90 Pkt	86 Pcnt	52.5 C
1788559765	14.25 Volt	190 Pkt	100 Pkt	86 Pcnt	53.5 C
1788558865	14.25 Volt	180 Pkt	90 Pkt	85 Pcnt	53.5 C
1788557965	14.25 Volt	190 Pkt	90 Pkt	86 Pcnt	53 C
1788557065	14.25 Volt	190 Pkt	90 Pkt	86 Pcnt	53.5 C
1788556165	14.25 Volt	190 Pkt	90 Pkt	88 Pcnt	54 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)