HORNMT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HORNMT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761531935	0.06 Rx Erlang	0.02 Tx Erlang	68 count/10m	0 count/10m	19 count/10m
1761530735	0.06 Rx Erlang	0.02 Tx Erlang	68 count/10m	0 count/10m	19 count/10m
1761529535	0.08 Rx Erlang	0.02 Tx Erlang	85 count/10m	0 count/10m	21 count/10m
1761528335	0.07 Rx Erlang	0.03 Tx Erlang	80 count/10m	0 count/10m	24 count/10m
1761527135	0.07 Rx Erlang	0.02 Tx Erlang	72 count/10m	0 count/10m	25 count/10m
1761525935	0.08 Rx Erlang	0.02 Tx Erlang	84 count/10m	0 count/10m	25 count/10m
1761524735	0.07 Rx Erlang	0.02 Tx Erlang	78 count/10m	0 count/10m	18 count/10m
1761522335	0.07 Rx Erlang	0.02 Tx Erlang	73 count/10m	0 count/10m	19 count/10m
1761521135	0.08 Rx Erlang	0.02 Tx Erlang	85 count/10m	0 count/10m	21 count/10m
1761519935	0.08 Rx Erlang	0.02 Tx Erlang	82 count/10m	0 count/10m	23 count/10m
1761518735	0.06 Rx Erlang	0.02 Tx Erlang	71 count/10m	0 count/10m	20 count/10m
1761517535	0.07 Rx Erlang	0.02 Tx Erlang	71 count/10m	0 count/10m	22 count/10m
1761516335	0.06 Rx Erlang	0.02 Tx Erlang	73 count/10m	0 count/10m	24 count/10m
1761515135	0.07 Rx Erlang	0.03 Tx Erlang	79 count/10m	2 count/10m	33 count/10m
1761513935	0.05 Rx Erlang	0.01 Tx Erlang	60 count/10m	1 count/10m	15 count/10m
1761512735	0.07 Rx Erlang	0.02 Tx Erlang	66 count/10m	0 count/10m	20 count/10m
1761511535	0.07 Rx Erlang	0.02 Tx Erlang	82 count/10m	0 count/10m	24 count/10m
1761510335	0.07 Rx Erlang	0.02 Tx Erlang	77 count/10m	0 count/10m	25 count/10m
1761507935	0.09 Rx Erlang	0.03 Tx Erlang	88 count/10m	0 count/10m	29 count/10m
1761506735	0.07 Rx Erlang	0.02 Tx Erlang	79 count/10m	0 count/10m	25 count/10m
1761505535	0.08 Rx Erlang	0.03 Tx Erlang	85 count/10m	0 count/10m	28 count/10m
1761504335	0.08 Rx Erlang	0.03 Tx Erlang	91 count/10m	0 count/10m	26 count/10m
1761503135	0.09 Rx Erlang	0.03 Tx Erlang	99 count/10m	2 count/10m	35 count/10m
1761499535	0.08 Rx Erlang	0.03 Tx Erlang	90 count/10m	0 count/10m	28 count/10m
1761498335	0.08 Rx Erlang	0.02 Tx Erlang	89 count/10m	0 count/10m	25 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)