YM4KFE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KFE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1765562836	8 Pkt	6 Pkt	-64 dBm	13.92 V
1765561903	12 Pkt	7 Pkt	-64 dBm	13.92 V
1765560991	18 Pkt	6 Pkt	-67 dBm	13.95 V
1765560033	17 Pkt	6 Pkt	-64 dBm	13.92 V
1765559100	12 Pkt	5 Pkt	-64 dBm	13.92 V
1765557233	9 Pkt	4 Pkt	-66 dBm	13.92 V
1765556302	11 Pkt	6 Pkt	-67 dBm	13.92 V
1765555368	16 Pkt	5 Pkt	-67 dBm	13.95 V
1765554435	21 Pkt	7 Pkt	-66 dBm	13.92 V
1765553501	19 Pkt	7 Pkt	-63 dBm	13.92 V
1765552566	22 Pkt	4 Pkt	-63 dBm	13.92 V
1765551632	19 Pkt	3 Pkt	-63 dBm	13.92 V
1765550721	9 Pkt	3 Pkt	-63 dBm	13.95 V
1765549770	14 Pkt	2 Pkt	-62 dBm	13.92 V
1765548841	2 Pkt	5 Pkt	-62 dBm	13.92 V
1765547910	5 Pkt	7 Pkt	-63 dBm	13.95 V
1765546977	14 Pkt	5 Pkt	-63 dBm	13.95 V
1765546045	3 Pkt	6 Pkt	-64 dBm	13.95 V
1765545113	1 Pkt	5 Pkt	-63 dBm	13.92 V
1765543248	2 Pkt	6 Pkt	-64 dBm	13.95 V
1765542315	13 Pkt	5 Pkt	-63 dBm	13.92 V
1765541384	6 Pkt	6 Pkt	-63 dBm	13.9 V
1765540452	13 Pkt	6 Pkt	-63 dBm	13.92 V
1765539518	17 Pkt	5 Pkt	-63 dBm	13.92 V
1765538586	13 Pkt	5 Pkt	-63 dBm	13.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)