CHLSEA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CHLSEA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784671724	12.38 Volt	580 Pkt	230 Pkt	62 Pcnt
1784671424	12.38 Volt	570 Pkt	220 Pkt	62 Pcnt
1784671124	12.38 Volt	550 Pkt	210 Pkt	62 Pcnt
1784670823	12.38 Volt	530 Pkt	210 Pkt	62 Pcnt
1784670523	12.38 Volt	520 Pkt	200 Pkt	62 Pcnt
1784670223	12.38 Volt	510 Pkt	190 Pkt	61 Pcnt
1784669922	12.38 Volt	510 Pkt	180 Pkt	61 Pcnt
1784669622	12.38 Volt	510 Pkt	180 Pkt	61 Pcnt
1784669322	12.38 Volt	500 Pkt	180 Pkt	62 Pcnt
1784669022	12.38 Volt	490 Pkt	180 Pkt	61 Pcnt
1784668721	12.38 Volt	490 Pkt	170 Pkt	60 Pcnt
1784668421	12.38 Volt	480 Pkt	170 Pkt	60 Pcnt
1784668121	12.38 Volt	460 Pkt	160 Pkt	57 Pcnt
1784667820	12.38 Volt	450 Pkt	160 Pkt	57 Pcnt
1784667520	12.38 Volt	450 Pkt	160 Pkt	58 Pcnt
1784667220	12.38 Volt	450 Pkt	170 Pkt	57 Pcnt
1784666919	12.38 Volt	440 Pkt	170 Pkt	56 Pcnt
1784666619	12.38 Volt	440 Pkt	180 Pkt	56 Pcnt
1784666319	12.38 Volt	430 Pkt	180 Pkt	55 Pcnt
1784666019	12.38 Volt	430 Pkt	180 Pkt	55 Pcnt
1784665718	12.38 Volt	440 Pkt	180 Pkt	55 Pcnt
1784665418	12.38 Volt	450 Pkt	200 Pkt	55 Pcnt
1784665118	12.38 Volt	450 Pkt	200 Pkt	56 Pcnt
1784664817	12.38 Volt	460 Pkt	210 Pkt	55 Pcnt
1784664517	12.38 Volt	470 Pkt	210 Pkt	57 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp1: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)