OE3PDB-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1776623488	13.11 Volt	200 Pkt	93 Pcnt	32 Pkt
1776619888	13.11 Volt	230 Pkt	95 Pcnt	51 Pkt
1776616288	13.11 Volt	240 Pkt	97 Pcnt	40 Pkt
1776612688	13.11 Volt	240 Pkt	96 Pcnt	31 Pkt
1776609688	13.11 Volt	40 Pkt	100 Pcnt	40 Pkt
1776607255	13.11 Volt	260 Pkt	99 Pcnt	46 Pkt
1776603655	13.11 Volt	200 Pkt	91 Pcnt	26 Pkt
1776600055	13.11 Volt	220 Pkt	88 Pcnt	33 Pkt
1776596455	13.11 Volt	210 Pkt	94 Pcnt	30 Pkt
1776592855	13.11 Volt	230 Pkt	90 Pcnt	29 Pkt
1776589255	13.11 Volt	240 Pkt	84 Pcnt	23 Pkt
1776585655	13.11 Volt	250 Pkt	94 Pcnt	40 Pkt
1776582056	13.11 Volt	210 Pkt	95 Pcnt	25 Pkt
1776578456	13.11 Volt	230 Pkt	93 Pcnt	37 Pkt
1776574856	13.11 Volt	210 Pkt	95 Pcnt	22 Pkt
1776571256	13.11 Volt	210 Pkt	94 Pcnt	33 Pkt
1776567656	13.11 Volt	190 Pkt	95 Pcnt	27 Pkt
1776564056	13.11 Volt	200 Pkt	97 Pcnt	30 Pkt
1776560456	13.11 Volt	310 Pkt	97 Pcnt	44 Pkt
1776556856	13.11 Volt	340 Pkt	97 Pcnt	52 Pkt
1776553256	13.11 Volt	340 Pkt	96 Pcnt	53 Pkt
1776549656	13.11 Volt	340 Pkt	95 Pcnt	52 Pkt
1776546056	13.11 Volt	420 Pkt	92 Pcnt	63 Pkt
1776542456	13.11 Volt	190 Pkt	96 Pcnt	36 Pkt
1776538857	13.11 Volt	200 Pkt	94 Pcnt	25 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)