IR3EO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3EO-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Volt*	Temp. *
1765645199	257 Pkt	1690 Pkt	11.93 Volt	12.8 Celsiu
1765644899	253 Pkt	1700 Pkt	12.01 Volt	12.8 Celsiu
1765644599	236 Pkt	1690 Pkt	11.93 Volt	12.8 Celsiu
1765644299	269 Pkt	1710 Pkt	11.93 Volt	12.8 Celsiu
1765644006	268 Pkt	1700 Pkt	11.93 Volt	12.8 Celsiu
1765643705	259 Pkt	1690 Pkt	12.01 Volt	12.8 Celsiu
1765643399	239 Pkt	1680 Pkt	11.93 Volt	12.8 Celsiu
1765643099	255 Pkt	1700 Pkt	11.93 Volt	12.8 Celsiu
1765642799	285 Pkt	1700 Pkt	11.93 Volt	12.8 Celsiu
1765642499	276 Pkt	1670 Pkt	11.93 Volt	12.8 Celsiu
1765642199	264 Pkt	1660 Pkt	11.93 Volt	12.8 Celsiu
1765641899	260 Pkt	1650 Pkt	11.93 Volt	12.8 Celsiu
1765641599	265 Pkt	1650 Pkt	11.93 Volt	12.8 Celsiu
1765641300	258 Pkt	1670 Pkt	11.93 Volt	12.8 Celsiu
1765641000	251 Pkt	1670 Pkt	11.93 Volt	12.8 Celsiu
1765640700	250 Pkt	1690 Pkt	11.93 Volt	12.8 Celsiu
1765639800	250 Pkt	1690 Pkt	11.93 Volt	12.8 Celsiu
1765639500	232 Pkt	1690 Pkt	11.93 Volt	12.8 Celsiu
1765639200	258 Pkt	1730 Pkt	11.93 Volt	12.8 Celsiu
1765638900	253 Pkt	1740 Pkt	11.93 Volt	12.8 Celsiu
1765638600	248 Pkt	1750 Pkt	11.93 Volt	12.8 Celsiu
1765638300	284 Pkt	1740 Pkt	11.93 Volt	12.8 Celsiu
1765638000	286 Pkt	1730 Pkt	12.01 Volt	12.8 Celsiu
1765637700	267 Pkt	1680 Pkt	11.93 Volt	12.8 Celsiu
1765637400	276 Pkt	1670 Pkt	11.93 Volt	12.8 Celsiu

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Volt: 0, 0.079, 0

Temp. : 0, 0.1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)