DO7AD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO7AD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1776672464	12.83 Volt	220 Pkt	74 Pcnt	19.5 DegC
1776671564	12.83 Volt	210 Pkt	74 Pcnt	19.5 DegC
1776670664	12.83 Volt	210 Pkt	74 Pcnt	19.5 DegC
1776669764	12.83 Volt	210 Pkt	74 Pcnt	19.5 DegC
1776668864	12.83 Volt	220 Pkt	74 Pcnt	19.5 DegC
1776667964	12.83 Volt	240 Pkt	74 Pcnt	19.5 DegC
1776667064	12.83 Volt	240 Pkt	74 Pcnt	19.5 DegC
1776666164	12.83 Volt	260 Pkt	74 Pcnt	19.5 DegC
1776665264	12.9 Volt	250 Pkt	74 Pcnt	19.5 DegC
1776664364	12.83 Volt	250 Pkt	74 Pcnt	19.5 DegC
1776663464	12.83 Volt	230 Pkt	74 Pcnt	19.5 DegC
1776662564	12.83 Volt	240 Pkt	74 Pcnt	19.5 DegC
1776661664	12.83 Volt	220 Pkt	74 Pcnt	19.5 DegC
1776660764	12.9 Volt	230 Pkt	74 Pcnt	19 DegC
1776659864	12.9 Volt	240 Pkt	74 Pcnt	19 DegC
1776658964	12.83 Volt	210 Pkt	74 Pcnt	19 DegC
1776658064	12.83 Volt	210 Pkt	74 Pcnt	19 DegC
1776657164	12.9 Volt	200 Pkt	74 Pcnt	19 DegC
1776656265	12.83 Volt	190 Pkt	74 Pcnt	19 DegC
1776655365	12.9 Volt	210 Pkt	74 Pcnt	19 DegC
1776654465	12.9 Volt	200 Pkt	74 Pcnt	19 DegC
1776653565	12.83 Volt	210 Pkt	74 Pcnt	19 DegC
1776652665	12.83 Volt	210 Pkt	74 Pcnt	19.5 DegC
1776651765	12.83 Volt	200 Pkt	74 Pcnt	19.5 DegC
1776650865	12.83 Volt	200 Pkt	74 Pcnt	19.5 DegC

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)