SQ8JIU-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8JIU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg1h*	Eff1h*	Temp*
1776695554	12.53 Volt	15 Pkt	1 Pkt	61 Pcnt	5 C
1776694954	12.53 Volt	11 Pkt	0 Pkt	66 Pcnt	5 C
1776694354	12.53 Volt	5 Pkt	0 Pkt	63 Pcnt	5 C
1776693754	12.53 Volt	21 Pkt	0 Pkt	62 Pcnt	5 C
1776693154	12.53 Volt	14 Pkt	1 Pkt	63 Pcnt	5 C
1776692554	12.53 Volt	5 Pkt	0 Pkt	64 Pcnt	5 C
1776691954	12.53 Volt	14 Pkt	1 Pkt	68 Pcnt	5 C
1776691354	12.53 Volt	16 Pkt	0 Pkt	66 Pcnt	5 C
1776690754	12.53 Volt	11 Pkt	0 Pkt	66 Pcnt	5 C
1776690154	12.53 Volt	25 Pkt	4 Pkt	69 Pcnt	5 C
1776689554	12.53 Volt	27 Pkt	4 Pkt	68 Pcnt	5 C
1776688954	12.53 Volt	21 Pkt	2 Pkt	71 Pcnt	5 C
1776688354	12.53 Volt	17 Pkt	2 Pkt	74 Pcnt	5 C
1776687754	12.45 Volt	8 Pkt	0 Pkt	78 Pcnt	5 C
1776687154	12.53 Volt	13 Pkt	0 Pkt	80 Pcnt	5 C
1776686554	12.53 Volt	13 Pkt	1 Pkt	78 Pcnt	5 C
1776685954	12.53 Volt	24 Pkt	3 Pkt	80 Pcnt	5 C
1776685354	12.53 Volt	21 Pkt	0 Pkt	82 Pcnt	5 C
1776684754	12.53 Volt	19 Pkt	0 Pkt	82 Pcnt	5 C
1776684154	12.53 Volt	13 Pkt	0 Pkt	83 Pcnt	5 C
1776683554	12.53 Volt	10 Pkt	0 Pkt	83 Pcnt	5 C
1776682954	12.53 Volt	25 Pkt	1 Pkt	84 Pcnt	5 C
1776682354	12.53 Volt	27 Pkt	0 Pkt	84 Pcnt	5 C
1776681754	12.53 Volt	32 Pkt	1 Pkt	82 Pcnt	5 C
1776681154	12.53 Volt	27 Pkt	0 Pkt	80 Pcnt	5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)