OK0BCA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0BCA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX pkts*	TX pkts*	uptime*
1765579581	911.25 pkts/hr	423.2 pkts/hr	6 days
1765578981	1008.2 pkts/hr	470.45 pkts/hr	6 days
1765578381	1022.45 pkts/hr	423.2 pkts/hr	6 days
1765577781	1065.8 pkts/hr	441.8 pkts/hr	6 days
1765577181	897.8 pkts/hr	336.2 pkts/hr	6 days
1765576581	1036.8 pkts/hr	361.25 pkts/hr	6 days
1765575980	966.05 pkts/hr	328.05 pkts/hr	6 days
1765575381	806.45 pkts/hr	369.8 pkts/hr	6 days
1765574781	980 pkts/hr	423.2 pkts/hr	6 days
1765574181	1095.2 pkts/hr	500 pkts/hr	6 days
1765573582	966.05 pkts/hr	369.8 pkts/hr	6 days
1765572981	952.2 pkts/hr	432.45 pkts/hr	6 days
1765572381	1065.8 pkts/hr	387.2 pkts/hr	6 days
1765571781	858.05 pkts/hr	460.8 pkts/hr	6 days
1765571181	1140.05 pkts/hr	490.05 pkts/hr	6 days
1765570581	1155.2 pkts/hr	490.05 pkts/hr	6 days
1765569981	1022.45 pkts/hr	344.45 pkts/hr	6 days
1765569381	1080.45 pkts/hr	396.05 pkts/hr	6 days
1765568781	1080.45 pkts/hr	387.2 pkts/hr	6 days
1765568180	897.8 pkts/hr	396.05 pkts/hr	6 days
1765567581	966.05 pkts/hr	387.2 pkts/hr	6 days
1765566981	1095.2 pkts/hr	432.45 pkts/hr	6 days
1765566381	966.05 pkts/hr	369.8 pkts/hr	6 days
1765565781	1110.05 pkts/hr	460.8 pkts/hr	6 days
1765565181	1080.45 pkts/hr	470.45 pkts/hr	6 days

*Used Equation Coefficients:

RX pkts: 0.05, 0, 0

TX pkts: 0.05, 0, 0

OUT_T: 0, 0.5, -25

RPT_TX_T: 0, 0.5, -25

uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)