SR0L Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR0L. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	MaxLsb*	MaxMsb*	LastTempr*	Vbatt*
1773097483	234 Raw	26 Raw	23.75 DegC	13.22 V
1773096855	240 Raw	26 Raw	23.75 DegC	13.2 V
1773096218	235 Raw	26 Raw	23.75 DegC	13.22 V
1773095585	248 Raw	26 Raw	23.75 DegC	13.22 V
1773094961	242 Raw	26 Raw	23.75 DegC	13.16 V
1773094332	243 Raw	26 Raw	23.75 DegC	13.14 V
1773093702	245 Raw	26 Raw	23.75 DegC	13.18 V
1773093073	247 Raw	26 Raw	23.75 DegC	13.22 V
1773092444	247 Raw	26 Raw	23.75 DegC	13.22 V
1773091815	251 Raw	26 Raw	23.75 DegC	13.14 V
1773091187	0 Raw	27 Raw	23.75 DegC	13.12 V
1773090558	252 Raw	26 Raw	23.75 DegC	13.2 V
1773089928	2 Raw	27 Raw	23.75 DegC	13.2 V
1773089300	3 Raw	27 Raw	23.75 DegC	13.22 V
1773088675	12 Raw	27 Raw	23.75 DegC	13.22 V
1773088046	255 Raw	26 Raw	23.75 DegC	13.22 V
1773087417	249 Raw	26 Raw	23.75 DegC	13.22 V
1773086788	4 Raw	27 Raw	23.75 DegC	13.22 V
1773086155	13 Raw	27 Raw	23.75 DegC	13.22 V
1773085526	3 Raw	27 Raw	23.75 DegC	13.22 V
1773084897	10 Raw	27 Raw	23.75 DegC	13.24 V
1773084265	3 Raw	27 Raw	23.75 DegC	13.24 V
1773083638	12 Raw	27 Raw	23.75 DegC	13.22 V
1773083007	21 Raw	27 Raw	23.75 DegC	13.24 V
1773082378	30 Raw	27 Raw	23.75 DegC	13.24 V

*Used Equation Coefficients:

MaxLsb: 0, 1, 0

MaxMsb: 0, 1, 0

LastTempr: 0, 0.25, -40

Vbatt: 0, 0.02, 10

PtSts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)