YF3FEO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YF3FEO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1787557489	15 Pkt	0 Pkt	31 dBm	12.63 V
1787556267	23 Pkt	0 Pkt	31 dBm	12.63 V
1787555043	15 Pkt	0 Pkt	31 dBm	12.63 V
1787553820	13 Pkt	0 Pkt	31 dBm	12.63 V
1787552596	24 Pkt	0 Pkt	31 dBm	12.65 V
1787551373	34 Pkt	0 Pkt	31 dBm	12.65 V
1787550149	29 Pkt	0 Pkt	31 dBm	12.65 V
1787548924	53 Pkt	1 Pkt	31 dBm	12.65 V
1787547697	28 Pkt	0 Pkt	31 dBm	12.65 V
1787546473	20 Pkt	0 Pkt	31 dBm	12.65 V
1787544025	15 Pkt	0 Pkt	31 dBm	12.67 V
1787541576	7 Pkt	1 Pkt	31 dBm	12.69 V
1787539130	25 Pkt	0 Pkt	31 dBm	12.71 V
1787537907	19 Pkt	0 Pkt	31 dBm	12.65 V
1787536682	12 Pkt	0 Pkt	31 dBm	12.67 V
1787534236	19 Pkt	0 Pkt	31 dBm	12.65 V
1787533013	18 Pkt	1 Pkt	31 dBm	12.63 V
1787531869	27 Pkt	0 Pkt	31 dBm	12.67 V
1787530567	19 Pkt	0 Pkt	31 dBm	12.65 V
1787529344	29 Pkt	1 Pkt	31 dBm	12.65 V
1787526897	19 Pkt	0 Pkt	31 dBm	12.65 V
1787525674	20 Pkt	2 Pkt	31 dBm	12.67 V
1787524450	16 Pkt	1 Pkt	31 dBm	12.65 V
1787523227	22 Pkt	0 Pkt	31 dBm	12.65 V
1787522003	22 Pkt	1 Pkt	31 dBm	12.65 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)