SP7THR-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7THR-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1765557718	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765556518	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765555318	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765554118	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765552918	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765551718	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765550518	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765550446	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765550244	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765550171	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765549642	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765549631	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765548848	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765548451	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765547251	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765546050	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765544850	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765538466	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765537266	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765536066	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765534865	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765533665	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765532467	0 Count	701 Count	0 Count	0 VDC	0 VDC
1765531265	0 Count	689 Count	0 Count	0 VDC	0 VDC
1765530065	0 Count	677 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)