KC1VSR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC1VSR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789898882	20 Pkts	0 Pkts	0 Pkts	22 C
1789895282	20 Pkts	0 Pkts	0 Pkts	22 C
1789891682	18 Pkts	0 Pkts	0 Pkts	22 C
1789888082	24 Pkts	6 Pkts	0 Pkts	22 C
1789884482	31 Pkts	13 Pkts	0 Pkts	22 C
1789880883	27 Pkts	8 Pkts	2 Pkts	22 C
1789877282	24 Pkts	5 Pkts	1 Pkts	22 C
1789873682	23 Pkts	5 Pkts	2 Pkts	22 C
1789870082	26 Pkts	7 Pkts	3 Pkts	22 C
1789866482	23 Pkts	4 Pkts	1 Pkts	22 C
1789862882	19 Pkts	1 Pkts	0 Pkts	22 C
1789859282	21 Pkts	1 Pkts	1 Pkts	22 C
1789855682	19 Pkts	0 Pkts	0 Pkts	22 C
1789852082	21 Pkts	1 Pkts	1 Pkts	22 C
1789848482	19 Pkts	0 Pkts	0 Pkts	22 C
1789844882	19 Pkts	0 Pkts	0 Pkts	22 C
1789841282	19 Pkts	0 Pkts	0 Pkts	22 C
1789837682	19 Pkts	0 Pkts	0 Pkts	22 C
1789834082	19 Pkts	0 Pkts	0 Pkts	22 C
1789830482	18 Pkts	0 Pkts	0 Pkts	22 C
1789826882	20 Pkts	0 Pkts	0 Pkts	22 C
1789823282	19 Pkts	0 Pkts	0 Pkts	22 C
1789819682	20 Pkts	0 Pkts	0 Pkts	22 C
1789816082	21 Pkts	1 Pkts	0 Pkts	22 C
1789812482	21 Pkts	2 Pkts	0 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)