DH1SP-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH1SP-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1789942700	1006.9 hPa	30.2 C deg	36.7 %	1027.9 hPa	0 C deg
1789942665	1006.9 hPa	30.2 C deg	36.6 %	1027.9 hPa	0 C deg
1789942630	1006.9 hPa	30.2 C deg	36.6 %	1027.9 hPa	0 C deg
1789942627	1006.9 hPa	30.2 C deg	36.6 %	1027.9 hPa	0 C deg
1789942592	1006.8 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942557	1006.9 hPa	30.3 C deg	36.6 %	1028 hPa	0 C deg
1789942522	1006.9 hPa	30.3 C deg	36.6 %	1028 hPa	0 C deg
1789942487	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942454	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942434	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942399	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942377	1006.9 hPa	30.3 C deg	36.5 %	1027.9 hPa	0 C deg
1789942366	1006.9 hPa	30.3 C deg	36.5 %	1027.9 hPa	0 C deg
1789942341	1006.9 hPa	30.3 C deg	36.5 %	1027.9 hPa	0 C deg
1789942306	1006.9 hPa	30.4 C deg	36.5 %	1027.9 hPa	0 C deg
1789942271	1006.9 hPa	30.4 C deg	36.5 %	1027.9 hPa	0 C deg
1789942236	1006.9 hPa	30.4 C deg	36.5 %	1027.9 hPa	0 C deg
1789942201	1006.8 hPa	30.3 C deg	36.5 %	1027.9 hPa	0 C deg
1789942168	1006.8 hPa	30.3 C deg	36.5 %	1027.9 hPa	0 C deg
1789942146	1006.8 hPa	30.3 C deg	36.5 %	1027.9 hPa	0 C deg
1789942124	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942115	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942099	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942098	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg
1789942097	1006.9 hPa	30.3 C deg	36.6 %	1027.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)