WB2QGZ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB2QGZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1761526254	326 Pkts	324 Pkts	88 Pkts	19 C	0 Pkts
1761522654	276 Pkts	274 Pkts	75 Pkts	19 C	1 Pkts
1761519054	299 Pkts	297 Pkts	80 Pkts	19 C	0 Pkts
1761515454	295 Pkts	292 Pkts	81 Pkts	18 C	0 Pkts
1761511854	310 Pkts	308 Pkts	85 Pkts	19 C	2 Pkts
1761508253	254 Pkts	252 Pkts	70 Pkts	19 C	1 Pkts
1761504654	235 Pkts	232 Pkts	66 Pkts	19 C	10 Pkts
1761495227	269 Pkts	267 Pkts	70 Pkts	19 C	4 Pkts
1761491627	320 Pkts	317 Pkts	67 Pkts	17 C	4 Pkts
1761488027	273 Pkts	271 Pkts	62 Pkts	17 C	1 Pkts
1761484427	355 Pkts	353 Pkts	95 Pkts	17 C	0 Pkts
1761480827	340 Pkts	338 Pkts	87 Pkts	17 C	0 Pkts
1761477227	350 Pkts	345 Pkts	96 Pkts	17 C	0 Pkts
1761473627	357 Pkts	353 Pkts	94 Pkts	17 C	0 Pkts
1761470027	332 Pkts	331 Pkts	94 Pkts	18 C	0 Pkts
1761466427	378 Pkts	374 Pkts	105 Pkts	18 C	3 Pkts
1761462827	336 Pkts	333 Pkts	102 Pkts	19 C	1 Pkts
1761459226	355 Pkts	352 Pkts	87 Pkts	18 C	1 Pkts
1761455626	409 Pkts	407 Pkts	82 Pkts	19 C	0 Pkts
1761452026	323 Pkts	321 Pkts	86 Pkts	18 C	1 Pkts
1761448428	284 Pkts	281 Pkts	87 Pkts	19 C	0 Pkts
1761444826	244 Pkts	241 Pkts	82 Pkts	19 C	0 Pkts
1761441226	192 Pkts	190 Pkts	32 Pkts	19 C	14 Pkts
1761437627	434 Pkts	432 Pkts	98 Pkts	19 C	160 Pkts
1761434025	229 Pkts	227 Pkts	43 Pkts	19 C	96 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)