SP7PA-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7PA-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1761536401	18 Deg.C	4 %
1761535802	18 Deg.C	4 %
1761535205	19 Deg.C	4 %
1761534601	19 Deg.C	4 %
1761534005	19 Deg.C	4 %
1761533402	15 Deg.C	4 %
1761532805	16 Deg.C	4 %
1761532202	17 Deg.C	4 %
1761531602	17 Deg.C	4 %
1761531005	18 Deg.C	4 %
1761530402	18 Deg.C	4 %
1761529810	16 Deg.C	4 %
1761529202	16 Deg.C	4 %
1761528605	17 Deg.C	4 %
1761528001	17 Deg.C	4 %
1761527402	17 Deg.C	4 %
1761526805	16 Deg.C	4 %
1761526202	16 Deg.C	4 %
1761525605	17 Deg.C	4 %
1761522002	18 Deg.C	4 %
1761521405	17 Deg.C	4 %
1761520801	17 Deg.C	4 %
1761519601	18 Deg.C	4 %
1761519002	18 Deg.C	4 %
1761518407	16 Deg.C	4 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)