DL4MDW-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4MDW-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Vsol*	Pbat*	Temp*	AirP*
1780565828	2.38 V	0.8 V	2 mW	43.45 degC	100425 Pa
1779997219	3 V	0.46 V	-166 mW	22.85 degC	101937.5 Pa
1779996919	3 V	0.46 V	-162 mW	22.91 degC	101937.5 Pa
1779992932	3.09 V	0.48 V	-96 mW	23.65 degC	101912.5 Pa
1779992926	3.08 V	0.48 V	-48 mW	23.99 degC	101887.5 Pa
1779992233	3.08 V	0.48 V	-90 mW	23.99 degC	101887.5 Pa
1779992226	3.09 V	0.48 V	-50 mW	23.99 degC	101887.5 Pa
1779992029	3.09 V	0.48 V	-44 mW	23.99 degC	101887.5 Pa
1779991729	3.08 V	0.49 V	-86 mW	24.13 degC	101875 Pa
1779991722	3.09 V	0.5 V	-48 mW	24.3 degC	101512.5 Pa
1779991545	3.09 V	0.5 V	-48 mW	24.3 degC	101512.5 Pa
1779991234	3.09 V	0.5 V	-94 mW	24.3 degC	101512.5 Pa
1779991228	3.1 V	0.5 V	-44 mW	24.42 degC	101575 Pa
1779990785	3.1 V	0.5 V	-92 mW	24.42 degC	101575 Pa
1779990779	3.1 V	0.5 V	-46 mW	24.5 degC	101600 Pa
1779990701	3.1 V	0.5 V	-90 mW	24.5 degC	101600 Pa
1779990694	3.1 V	0.51 V	-44 mW	24.93 degC	101612.5 Pa
1779989690	3.1 V	0.51 V	-90 mW	24.93 degC	101612.5 Pa
1779989684	3.1 V	0.51 V	-44 mW	25.05 degC	101637.5 Pa
1779989467	3.1 V	0.51 V	-90 mW	25.05 degC	101637.5 Pa
1779989461	3.11 V	0.53 V	-42 mW	25.39 degC	101737.5 Pa
1779988883	3.11 V	0.53 V	-88 mW	25.39 degC	101737.5 Pa
1779988877	3.06 V	0.54 V	-174 mW	26.85 degC	101725 Pa
1779988111	3.06 V	0.54 V	-218 mW	26.85 degC	101725 Pa
1779988104	3.11 V	0.55 V	-38 mW	26.09 degC	101787.5 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Pbat: 0, 2, -4096

Temp: 0, 0.01, 0

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)