DB5COA-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB5COA-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761550928	983.7 hPa	28.4 C deg	28.6 %	1000.6 hPa	0 C deg
1761549128	983.9 hPa	28.4 C deg	28.6 %	1000.9 hPa	0 C deg
1761547327	983.9 hPa	28.2 C deg	28.7 %	1000.9 hPa	0 C deg
1761545713	983.9 hPa	28.2 C deg	28.7 %	1000.8 hPa	0 C deg
1761545527	983.9 hPa	28.2 C deg	28.7 %	1000.8 hPa	0 C deg
1761543726	984 hPa	28.3 C deg	28.6 %	1000.9 hPa	0 C deg
1761541926	984.2 hPa	28.1 C deg	28.8 %	1001.1 hPa	0 C deg
1761538326	985.2 hPa	28.2 C deg	28.7 %	1002.2 hPa	0 C deg
1761536782	985.3 hPa	28.1 C deg	28.9 %	1002.3 hPa	0 C deg
1761536526	985.3 hPa	28.1 C deg	28.9 %	1002.3 hPa	0 C deg
1761534726	985.9 hPa	28.2 C deg	28.8 %	1002.9 hPa	0 C deg
1761531220	987.4 hPa	28.3 C deg	28.8 %	1004.4 hPa	0 C deg
1761531133	987.4 hPa	28.3 C deg	28.8 %	1004.4 hPa	0 C deg
1761529326	988.2 hPa	28.4 C deg	28.7 %	1005.2 hPa	0 C deg
1761523933	990 hPa	28.2 C deg	28.9 %	1007.1 hPa	0 C deg
1761522128	990.6 hPa	28.3 C deg	28.8 %	1007.6 hPa	0 C deg
1761520325	991.2 hPa	28.4 C deg	28.8 %	1008.2 hPa	0 C deg
1761518850	991.4 hPa	28.4 C deg	28.8 %	1008.5 hPa	0 C deg
1761518850	991.4 hPa	28.4 C deg	28.8 %	1008.5 hPa	0 C deg
1761518525	991.4 hPa	28.4 C deg	28.8 %	1008.5 hPa	0 C deg
1761516725	991.7 hPa	28.3 C deg	28.9 %	1008.8 hPa	0 C deg
1761514925	992.1 hPa	28.2 C deg	29 %	1009.2 hPa	0 C deg
1761511324	992.3 hPa	28.2 C deg	29 %	1009.4 hPa	0 C deg
1761504124	993.1 hPa	28.4 C deg	28.9 %	1010.2 hPa	0 C deg
1761502602	993 hPa	28.2 C deg	29.1 %	1010.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)