DF1WN-77 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF1WN-77. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761506894	996.4 hPa	29.5 C deg	1009.9 hPa	0 C deg
1761506894	996.4 hPa	29.5 C deg	1009.9 hPa	0 C deg
1761505094	996.6 hPa	29.5 C deg	1010 hPa	0 C deg
1761505094	996.6 hPa	29.5 C deg	1010 hPa	0 C deg
1761503294	996.5 hPa	29.3 C deg	1009.9 hPa	0 C deg
1761501502	996.6 hPa	29.4 C deg	1010.1 hPa	0 C deg
1761499837	996.5 hPa	29 C deg	1009.9 hPa	0 C deg
1761499694	996.5 hPa	29 C deg	1009.9 hPa	0 C deg
1761497895	996.4 hPa	29.6 C deg	1009.8 hPa	0 C deg
1761494315	996.3 hPa	29.6 C deg	1009.7 hPa	0 C deg
1761494292	996.3 hPa	29.6 C deg	1009.7 hPa	0 C deg
1761492496	996.1 hPa	29.7 C deg	1009.6 hPa	0 C deg
1761488897	996 hPa	29.9 C deg	1009.4 hPa	0 C deg
1761487166	995.7 hPa	30.2 C deg	1009.1 hPa	0 C deg
1761487102	995.7 hPa	30.2 C deg	1009.1 hPa	0 C deg
1761485299	995.6 hPa	30 C deg	1009 hPa	0 C deg
1761485299	995.6 hPa	30 C deg	1009 hPa	0 C deg
1761481702	995.5 hPa	30.3 C deg	1008.9 hPa	0 C deg
1761479897	995.3 hPa	30.5 C deg	1008.7 hPa	0 C deg
1761478092	995.4 hPa	30.5 C deg	1008.8 hPa	0 C deg
1761478092	995.4 hPa	30.5 C deg	1008.8 hPa	0 C deg
1761476337	995.3 hPa	30.5 C deg	1008.7 hPa	0 C deg
1761476296	995.3 hPa	30.5 C deg	1008.7 hPa	0 C deg
1761474498	995.4 hPa	30.2 C deg	1008.8 hPa	0 C deg
1761474491	995.4 hPa	30.2 C deg	1008.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)