HB9FG-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9FG-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Eff1h*
1784683530	10 Pkt	50 Pcnt
1784682930	10 Pkt	57 Pcnt
1784682329	10 Pkt	50 Pcnt
1784682029	10 Pkt	50 Pcnt
1784681729	10 Pkt	52 Pcnt
1784681428	10 Pkt	47 Pcnt
1784680828	10 Pkt	59 Pcnt
1784680227	10 Pkt	57 Pcnt
1784679927	10 Pkt	59 Pcnt
1784679627	10 Pkt	59 Pcnt
1784679327	10 Pkt	57 Pcnt
1784679033	10 Pkt	52 Pcnt
1784678726	10 Pkt	54 Pcnt
1784678426	10 Pkt	57 Pcnt
1784678125	10 Pkt	52 Pcnt
1784677525	10 Pkt	47 Pcnt
1784677225	0 Pkt	39 Pcnt
1784676924	0 Pkt	34 Pcnt
1784676324	0 Pkt	36 Pcnt
1784676024	10 Pkt	40 Pcnt
1784675723	10 Pkt	42 Pcnt
1784675123	10 Pkt	43 Pcnt
1784674823	10 Pkt	41 Pcnt
1784674530	10 Pkt	44 Pcnt
1784673922	10 Pkt	39 Pcnt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)