DB0SEP-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SEP-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761534889	984.6 hPa	9.2 C deg	79.8 %	988 hPa	0 C deg
1761534886	984.6 hPa	9.2 C deg	79.8 %	988 hPa	0 C deg
1761533071	985 hPa	8.9 C deg	79.4 %	988.4 hPa	0 C deg
1761531257	985.6 hPa	8.7 C deg	79.1 %	989.1 hPa	0 C deg
1761531256	985.6 hPa	8.7 C deg	79.1 %	989.1 hPa	0 C deg
1761529441	986.4 hPa	8.4 C deg	79 %	989.9 hPa	0 C deg
1761527626	987 hPa	8.2 C deg	78.8 %	990.5 hPa	0 C deg
1761525823	987.8 hPa	8.2 C deg	77.6 %	991.2 hPa	0 C deg
1761525810	987.8 hPa	8.2 C deg	77.6 %	991.2 hPa	0 C deg
1761523995	988.7 hPa	8.1 C deg	77 %	992.2 hPa	0 C deg
1761522180	989.5 hPa	8 C deg	77.2 %	993 hPa	0 C deg
1761520365	990 hPa	8 C deg	77.1 %	993.5 hPa	0 C deg
1761518579	990.5 hPa	8.1 C deg	76.1 %	994 hPa	0 C deg
1761518549	990.5 hPa	8.1 C deg	76.1 %	994 hPa	0 C deg
1761516734	991.2 hPa	7.9 C deg	76.4 %	994.7 hPa	0 C deg
1761514919	991.7 hPa	8 C deg	75.2 %	995.2 hPa	0 C deg
1761513103	992.4 hPa	8 C deg	74.6 %	995.9 hPa	0 C deg
1761511286	992.8 hPa	8.1 C deg	72.6 %	996.3 hPa	0 C deg
1761509470	993 hPa	8.3 C deg	69.3 %	996.5 hPa	0 C deg
1761507678	993.1 hPa	8.2 C deg	67.3 %	996.6 hPa	0 C deg
1761507655	993.1 hPa	8.2 C deg	67.3 %	996.6 hPa	0 C deg
1761505840	993.4 hPa	8.1 C deg	68.5 %	996.9 hPa	0 C deg
1761504025	993.7 hPa	8.1 C deg	69.1 %	997.1 hPa	0 C deg
1761502210	993.9 hPa	7.9 C deg	70.5 %	997.4 hPa	0 C deg
1761500395	994 hPa	8.1 C deg	72 %	997.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)