DM0MTK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM0MTK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761538369	985.4 hPa	23.4 C deg	36.5 %	1000.5 hPa	0 C deg
1761536815	985.7 hPa	23.1 C deg	36.4 %	1000.7 hPa	0 C deg
1761536558	985.7 hPa	23.1 C deg	36.4 %	1000.7 hPa	0 C deg
1761534770	986 hPa	23.2 C deg	36.5 %	1001.1 hPa	0 C deg
1761534761	986 hPa	23.2 C deg	36.5 %	1001.1 hPa	0 C deg
1761531157	987.3 hPa	23.3 C deg	37 %	1002.4 hPa	0 C deg
1761529361	988 hPa	23.3 C deg	37 %	1003.1 hPa	0 C deg
1761527557	988.6 hPa	23.6 C deg	36.4 %	1003.7 hPa	0 C deg
1761525767	989.2 hPa	23.5 C deg	36.9 %	1004.4 hPa	0 C deg
1761525757	989.2 hPa	23.5 C deg	36.9 %	1004.4 hPa	0 C deg
1761523963	990 hPa	23.4 C deg	36.8 %	1005.1 hPa	0 C deg
1761523957	990 hPa	23.4 C deg	36.8 %	1005.1 hPa	0 C deg
1761522279	990.5 hPa	23.5 C deg	36.8 %	1005.7 hPa	0 C deg
1761520360	990.9 hPa	23.5 C deg	36.5 %	1006 hPa	0 C deg
1761518557	991.3 hPa	23.6 C deg	36.3 %	1006.5 hPa	0 C deg
1761518557	991.3 hPa	23.6 C deg	36.3 %	1006.5 hPa	0 C deg
1761516757	991.7 hPa	24 C deg	35.1 %	1006.9 hPa	0 C deg
1761514969	992 hPa	24.2 C deg	32.9 %	1007.1 hPa	0 C deg
1761513172	992.2 hPa	24.3 C deg	32.6 %	1007.3 hPa	0 C deg
1761513162	992.2 hPa	24.3 C deg	32.6 %	1007.3 hPa	0 C deg
1761511367	992.2 hPa	24 C deg	32.5 %	1007.4 hPa	0 C deg
1761509557	992.4 hPa	23.8 C deg	31.7 %	1007.6 hPa	0 C deg
1761509557	992.4 hPa	23.8 C deg	31.7 %	1007.6 hPa	0 C deg
1761505957	992.9 hPa	24 C deg	32.1 %	1008 hPa	0 C deg
1761504157	993 hPa	24 C deg	33.2 %	1008.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)