EL-F5PZT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-F5PZT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1788707634	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788707034	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788706434	0 RX Erlang	0.21 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788705834	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	19 TXcount/10m
1788705234	0 RX Erlang	0.48 TX Erlang	0 RXcount/10m	13 TXcount/10m
1788704634	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	2 TXcount/10m
1788704034	0 RX Erlang	0.77 TX Erlang	0 RXcount/10m	10 TXcount/10m
1788703434	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	12 TXcount/10m
1788702834	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	10 TXcount/10m
1788702234	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	13 TXcount/10m
1788701634	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788701034	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1788700434	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788699834	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788699234	0 RX Erlang	0.15 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788698634	0 RX Erlang	0.85 TX Erlang	0 RXcount/10m	15 TXcount/10m
1788698034	0 RX Erlang	0.34 TX Erlang	0 RXcount/10m	8 TXcount/10m
1788697434	0 RX Erlang	0.36 TX Erlang	0 RXcount/10m	11 TXcount/10m
1788696834	0 RX Erlang	0.35 TX Erlang	0 RXcount/10m	9 TXcount/10m
1788696234	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788695634	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	6 TXcount/10m
1788695034	0 RX Erlang	0.52 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788694434	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788693834	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	10 TXcount/10m
1788693234	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)