This is the latest recevied telemetry packets stored in our database for station/object LU8DCH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RxTraffic*
TxTraffic*
RxDrop*
RSSI*
Voltage*
1784782174
37 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784780352
30 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784776705
51 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784774881
45 Pkt
0 Pkt
4 Pkt
31 dBm
12.65 V
1784773059
36 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784771236
33 Pkt
0 Pkt
10 Pkt
31 dBm
12.65 V
1784769413
31 Pkt
0 Pkt
4 Pkt
31 dBm
12.65 V
1784767590
32 Pkt
0 Pkt
18 Pkt
31 dBm
12.65 V
1784765766
3 Pkt
0 Pkt
1 Pkt
31 dBm
12.65 V
1784760299
33 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784758475
52 Pkt
0 Pkt
3 Pkt
31 dBm
12.63 V
1784756652
37 Pkt
0 Pkt
0 Pkt
31 dBm
12.63 V
1784753006
43 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784751182
65 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784749354
70 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784747531
77 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
1784745706
40 Pkt
0 Pkt
0 Pkt
31 dBm
12.63 V
1784743883
3 Pkt
0 Pkt
0 Pkt
31 dBm
12.65 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)