DA6WT-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DA6WT-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1780584173	988.6 hPa	31.1 C deg	32.6 %	1006 hPa	0 C deg
1780582358	988.1 hPa	31.1 C deg	32.9 %	1005.5 hPa	0 C deg
1780580543	987.8 hPa	30.9 C deg	33.1 %	1005.2 hPa	0 C deg
1780578742	987.8 hPa	30.9 C deg	33.2 %	1005.3 hPa	0 C deg
1780578728	987.8 hPa	30.9 C deg	33.2 %	1005.3 hPa	0 C deg
1780576913	987.8 hPa	30.9 C deg	33.1 %	1005.2 hPa	0 C deg
1780575098	987.9 hPa	30.7 C deg	33.4 %	1005.3 hPa	0 C deg
1780573283	988.1 hPa	30.5 C deg	33.7 %	1005.6 hPa	0 C deg
1780571468	988.1 hPa	30.6 C deg	33.7 %	1005.6 hPa	0 C deg
1780569653	988.2 hPa	30.4 C deg	33.8 %	1005.6 hPa	0 C deg
1780567838	988.1 hPa	30.5 C deg	34 %	1005.6 hPa	0 C deg
1780566055	988.3 hPa	30.7 C deg	34.3 %	1005.7 hPa	0 C deg
1780566023	988.3 hPa	30.7 C deg	34.3 %	1005.7 hPa	0 C deg
1780564208	988.3 hPa	30.8 C deg	34.8 %	1005.7 hPa	0 C deg
1780562393	988.5 hPa	30.5 C deg	35.9 %	1005.9 hPa	0 C deg
1780560578	988.3 hPa	29.7 C deg	37.9 %	1005.9 hPa	0 C deg
1780558763	988.4 hPa	24.9 C deg	42.7 %	1006.2 hPa	0 C deg
1780414793	988.7 hPa	30.7 C deg	31.6 %	1006.2 hPa	0 C deg
1780412978	988.4 hPa	30.7 C deg	31.4 %	1005.9 hPa	0 C deg
1780411163	988.9 hPa	30 C deg	31.6 %	1006.4 hPa	0 C deg
1780409348	988.8 hPa	28.9 C deg	31.4 %	1006.3 hPa	0 C deg
1780407552	988.7 hPa	29.1 C deg	31.2 %	1006.3 hPa	0 C deg
1780407533	988.7 hPa	29.1 C deg	31.2 %	1006.3 hPa	0 C deg
1780403903	989.4 hPa	30.1 C deg	31.3 %	1006.9 hPa	0 C deg
1780402088	989.8 hPa	30.3 C deg	32 %	1007.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)