YB0OSU-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB0OSU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1765787696	26 Pkt	-65 dBm	13.45 V
1765786773	21 Pkt	-67 dBm	13.45 V
1765785849	49 Pkt	-66 dBm	13.45 V
1765784925	45 Pkt	-69 dBm	13.45 V
1765784000	28 Pkt	-67 dBm	13.43 V
1765783075	27 Pkt	-64 dBm	13.43 V
1765782149	32 Pkt	-67 dBm	13.45 V
1765781406	0 Pkt	-64 dBm	13.45 V
1765776566	39 Pkt	-65 dBm	13.43 V
1765775641	44 Pkt	-66 dBm	13.43 V
1765774716	49 Pkt	-66 dBm	13.45 V
1765773791	67 Pkt	-65 dBm	13.43 V
1765772863	6 Pkt	-66 dBm	13.43 V
1765758560	26 Pkt	-63 dBm	13.43 V
1765756712	28 Pkt	-68 dBm	13.45 V
1765755787	16 Pkt	-66 dBm	13.45 V
1765754864	27 Pkt	-67 dBm	13.45 V
1765753940	25 Pkt	-64 dBm	13.45 V
1765753017	20 Pkt	-66 dBm	13.45 V
1765752093	10 Pkt	-65 dBm	13.43 V
1765751199	30 Pkt	-66 dBm	13.43 V
1765750246	29 Pkt	-67 dBm	13.43 V
1765749322	34 Pkt	-66 dBm	13.41 V
1765748397	31 Pkt	-66 dBm	13.45 V
1765747473	30 Pkt	-66 dBm	13.45 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)