DF2AP-98 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF2AP-98. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1765558113	990.4 hPa	18.9 C deg	80.4 %	1023.8 hPa	0 C deg
1765558113	990.4 hPa	18.9 C deg	80.4 %	1023.8 hPa	0 C deg
1765557887	990.3 hPa	19.1 C deg	79.6 %	1024.2 hPa	0 C deg
1765555523	990.1 hPa	21.1 C deg	62.8 %	1024 hPa	0 C deg
1765555518	990.1 hPa	21.1 C deg	62.8 %	1024 hPa	0 C deg
1765551910	990.2 hPa	21.5 C deg	61.9 %	1024 hPa	0 C deg
1765551910	990.2 hPa	21.5 C deg	61.9 %	1024 hPa	0 C deg
1765548269	989.8 hPa	21.1 C deg	63.9 %	1023.7 hPa	0 C deg
1765546461	989.9 hPa	21.1 C deg	64.2 %	1023.8 hPa	0 C deg
1765544623	990 hPa	21.2 C deg	66.9 %	1023.8 hPa	0 C deg
1765539681	990.4 hPa	18.9 C deg	74.4 %	1024.5 hPa	0 C deg
1765536055	990.5 hPa	18.5 C deg	78.4 %	1024.7 hPa	0 C deg
1765536049	990.5 hPa	18.5 C deg	78.4 %	1024.7 hPa	0 C deg
1765534232	990.6 hPa	18.4 C deg	83.9 %	1024.8 hPa	0 C deg
1765530293	990.7 hPa	17.9 C deg	87 %	1025 hPa	0 C deg
1765530291	990.7 hPa	17.9 C deg	87 %	1025 hPa	0 C deg
1765528482	990.5 hPa	17.3 C deg	76.3 %	1024.9 hPa	0 C deg
1765528479	990.5 hPa	17.3 C deg	76.3 %	1024.9 hPa	0 C deg
1765524851	990.4 hPa	17.2 C deg	69.3 %	1024.8 hPa	0 C deg
1765524851	990.4 hPa	17.2 C deg	69.3 %	1024.8 hPa	0 C deg
1765523051	990.4 hPa	17.3 C deg	69.3 %	1024.7 hPa	0 C deg
1765523043	990.4 hPa	17.3 C deg	69.3 %	1024.7 hPa	0 C deg
1765510332	989.7 hPa	17.8 C deg	67.6 %	1024 hPa	0 C deg
1765510332	989.7 hPa	17.8 C deg	67.6 %	1024 hPa	0 C deg
1765508541	989.4 hPa	17.9 C deg	67.9 %	1023.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)