DL4ALF-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4ALF-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1761540980	934.9 hPa	8.1 C deg	71.6 %	1161 -	0 C deg
1761539165	935.3 hPa	8 C deg	71 %	1252 -	0 C deg
1761537347	935.9 hPa	7.9 C deg	70.4 %	1356 -	0 C deg
1761535556	936.5 hPa	7.8 C deg	70.1 %	1432 -	0 C deg
1761533752	936.9 hPa	7.6 C deg	70 %	1527 -	0 C deg
1761531921	937.5 hPa	7.6 C deg	69.6 %	1618 -	0 C deg
1761528274	938.6 hPa	7.5 C deg	68.3 %	1837 -	0 C deg
1761526457	939.1 hPa	7.6 C deg	67.3 %	2009 -	0 C deg
1761521013	939.7 hPa	7.8 C deg	63.1 %	2783 -	0 C deg
1761519206	940.1 hPa	7.8 C deg	62.4 %	3082 -	0 C deg
1761517387	940.5 hPa	7.7 C deg	62.3 %	3063 -	0 C deg
1761515566	940.7 hPa	7.9 C deg	62 %	3133 -	0 C deg
1761511941	941.4 hPa	8.2 C deg	61.7 %	2952 -	0 C deg
1761511940	941.4 hPa	8.2 C deg	61.7 %	2952 -	0 C deg
1761508331	941.6 hPa	8.4 C deg	62 %	2635 -	0 C deg
1761506512	941.5 hPa	8.4 C deg	61.9 %	2640 -	0 C deg
1761506510	941.5 hPa	8.4 C deg	61.9 %	2640 -	0 C deg
1761504680	941.5 hPa	8.6 C deg	61 %	2783 -	0 C deg
1761502861	941.4 hPa	8.8 C deg	62.3 %	2336 -	0 C deg
1761502860	941.4 hPa	8.8 C deg	62.3 %	2336 -	0 C deg
1761501088	941.3 hPa	8.8 C deg	63.5 %	1968 -	0 C deg
1761499238	940.8 hPa	8.8 C deg	64.6 %	1632 -	0 C deg
1761495678	939.2 hPa	8.6 C deg	68.2 %	156 -	0 C deg
1761495677	939.2 hPa	8.6 C deg	68.2 %	156 -	0 C deg
1761495665	938.8 hPa	8.5 C deg	68.8 %	279 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)