EL-PT9GPR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-PT9GPR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765576135	0.33 RX Erlang	0.44 TX Erlang	18 RXcount/10m	29 TXcount/10m
1765575535	0.13 RX Erlang	0.75 TX Erlang	2 RXcount/10m	12 TXcount/10m
1765574935	0.23 RX Erlang	0.7 TX Erlang	11 RXcount/10m	19 TXcount/10m
1765574335	0.29 RX Erlang	0.54 TX Erlang	15 RXcount/10m	22 TXcount/10m
1765573735	0.41 RX Erlang	0.12 TX Erlang	28 RXcount/10m	32 TXcount/10m
1765573135	0 RX Erlang	0 TX Erlang	1 RXcount/10m	1 TXcount/10m
1765572535	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765571335	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765569535	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765567690	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765567113	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765566490	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765565890	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765565290	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765564690	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765563634	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765563056	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765562434	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765561234	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765560034	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765559434	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765558834	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765558234	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765557634	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765557034	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)