KW3DX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KW3DX-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789954596	14.25 Volt	140 Pkt	60 Pkt	89 Pcnt
1789954298	14.25 Volt	160 Pkt	70 Pkt	90 Pcnt
1789954296	14.25 Volt	160 Pkt	70 Pkt	90 Pcnt
1789953996	14.25 Volt	170 Pkt	70 Pkt	91 Pcnt
1789953696	14.25 Volt	170 Pkt	70 Pkt	91 Pcnt
1789953396	14.25 Volt	160 Pkt	70 Pkt	92 Pcnt
1789953372	14.25 Volt	180 Pkt	80 Pkt	91 Pcnt
1789953133	14.25 Volt	180 Pkt	80 Pkt	91 Pcnt
1789952796	14.25 Volt	180 Pkt	70 Pkt	90 Pcnt
1789952523	14.25 Volt	180 Pkt	80 Pkt	88 Pcnt
1789952496	14.25 Volt	180 Pkt	80 Pkt	88 Pcnt
1789952196	14.25 Volt	170 Pkt	70 Pkt	87 Pcnt
1789951942	14.25 Volt	150 Pkt	70 Pkt	86 Pcnt
1789951896	14.25 Volt	150 Pkt	70 Pkt	86 Pcnt
1789951596	14.25 Volt	140 Pkt	60 Pkt	86 Pcnt
1789951300	14.25 Volt	140 Pkt	60 Pkt	83 Pcnt
1789951296	14.25 Volt	140 Pkt	60 Pkt	83 Pcnt
1789950996	14.25 Volt	110 Pkt	50 Pkt	75 Pcnt
1789950863	14.25 Volt	80 Pkt	30 Pkt	66 Pcnt
1789950696	14.25 Volt	80 Pkt	30 Pkt	66 Pcnt
1789950396	14.25 Volt	70 Pkt	30 Pkt	60 Pcnt
1789950099	14.25 Volt	60 Pkt	20 Pkt	53 Pcnt
1789950096	14.25 Volt	60 Pkt	20 Pkt	53 Pcnt
1789949796	14.25 Volt	50 Pkt	20 Pkt	45 Pcnt
1789949496	14.25 Volt	30 Pkt	10 Pkt	35 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)