DG4MNU-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG4MNU-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Baro*
1788579821	24.4 deg C	53.1 %	1014.2 hPa
1788578916	24.4 deg C	53.2 %	1014 hPa
1788577144	24.6 deg C	52.8 %	1014.2 hPa
1788576249	24.7 deg C	52.7 %	1013.8 hPa
1788575346	24.7 deg C	52.6 %	1013.5 hPa
1788574441	24.8 deg C	52.4 %	1013.5 hPa
1788573536	24.8 deg C	52.6 %	1013.6 hPa
1788572636	24.9 deg C	52.6 %	1013.5 hPa
1788571734	24.9 deg C	52.6 %	1013.4 hPa
1788570829	25.1 deg C	52.8 %	1013.4 hPa
1788569928	25.1 deg C	52.9 %	1012.9 hPa
1788569029	25 deg C	53.3 %	1012.7 hPa
1788568133	25 deg C	53.2 %	1012.3 hPa
1788567262	25 deg C	53.7 %	1012.2 hPa
1788566333	25.1 deg C	54.3 %	1011.8 hPa
1788565433	25.1 deg C	55.5 %	1012.1 hPa
1788564538	25.2 deg C	56.4 %	1012.2 hPa
1788563636	25.3 deg C	57.3 %	1012 hPa
1788562737	25.3 deg C	57.7 %	1012 hPa
1788561838	25.4 deg C	58 %	1012.2 hPa
1788560939	25.5 deg C	58.4 %	1012.1 hPa
1788560035	25.5 deg C	58.5 %	1011.9 hPa
1788559130	25.5 deg C	58.6 %	1011.2 hPa
1788558229	25.6 deg C	58.5 %	1010.7 hPa
1788557331	25.6 deg C	58.1 %	1009.8 hPa

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Baro: 0, 0.1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)