VK5RPL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RPL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1757552117	16 Deg.C	13.8 Volts	38 PTT's	10	37
1757550316	16 Deg.C	13.8 Volts	40 PTT's	10	7
1757548517	15.5 Deg.C	13.8 Volts	43 PTT's	9	37
1757546717	15.5 Deg.C	13.8 Volts	43 PTT's	9	7
1757544923	15 Deg.C	13.7 Volts	45 PTT's	8	37
1757543125	15 Deg.C	13.8 Volts	54 PTT's	8	7
1757541317	15 Deg.C	13.8 Volts	41 PTT's	7	37
1757539517	15 Deg.C	13.8 Volts	35 PTT's	7	7
1757537717	15 Deg.C	13.8 Volts	42 PTT's	6	37
1757535920	15.5 Deg.C	13.8 Volts	47 PTT's	6	7
1757534117	15.5 Deg.C	13.8 Volts	40 PTT's	5	37
1757532316	15.5 Deg.C	13.8 Volts	34 PTT's	5	7
1757530516	15.5 Deg.C	13.8 Volts	38 PTT's	4	37
1757526917	15.5 Deg.C	13.8 Volts	40 PTT's	3	37
1757525116	15.5 Deg.C	13.8 Volts	30 PTT's	3	7
1757523317	16 Deg.C	13.8 Volts	37 PTT's	2	37
1757521519	16 Deg.C	13.8 Volts	33 PTT's	2	7
1757519717	16 Deg.C	13.8 Volts	42 PTT's	1	37
1757517917	16 Deg.C	13.8 Volts	30 PTT's	1	7
1757516120	16.5 Deg.C	13.8 Volts	40 PTT's	0	37
1757514317	16.5 Deg.C	13.8 Volts	32 PTT's	0	7
1757512521	16.5 Deg.C	13.8 Volts	41 PTT's	23	37
1757510726	16.5 Deg.C	13.8 Volts	31 PTT's	23	7
1757508917	17 Deg.C	13.8 Volts	39 PTT's	22	37
1757507122	17 Deg.C	13.8 Volts	33 PTT's	22	7

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)