9A3XK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A3XK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1780588061	19 Pkt	160 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780587762	26 Pkt	170 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780587461	25 Pkt	160 Pkt	0 Pkt	3.85 Pcnt	82 Pcnt
1780587222	27 Pkt	160 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780587161	24 Pkt	160 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780586861	19 Pkt	160 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780586561	23 Pkt	170 Pkt	0 Pkt	3.84 Pcnt	82 Pcnt
1780586261	23 Pkt	170 Pkt	0 Pkt	3.85 Pcnt	82 Pcnt
1780585961	23 Pkt	170 Pkt	0 Pkt	3.85 Pcnt	82 Pcnt
1780585661	25 Pkt	180 Pkt	0 Pkt	3.85 Pcnt	82 Pcnt
1780585482	31 Pkt	180 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780585361	30 Pkt	170 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780585061	31 Pkt	170 Pkt	3 Pkt	3.86 Pcnt	82 Pcnt
1780584761	25 Pkt	160 Pkt	1 Pkt	3.85 Pcnt	82 Pcnt
1780584461	22 Pkt	150 Pkt	2 Pkt	3.85 Pcnt	82 Pcnt
1780584161	23 Pkt	150 Pkt	3 Pkt	3.85 Pcnt	82 Pcnt
1780583861	26 Pkt	140 Pkt	1 Pkt	3.84 Pcnt	82 Pcnt
1780583742	27 Pkt	140 Pkt	0 Pkt	3.85 Pcnt	82 Pcnt
1780583561	26 Pkt	140 Pkt	2 Pkt	3.84 Pcnt	82 Pcnt
1780583261	27 Pkt	130 Pkt	3 Pkt	3.84 Pcnt	82 Pcnt
1780582961	32 Pkt	120 Pkt	1 Pkt	3.84 Pcnt	82 Pcnt
1780582661	31 Pkt	110 Pkt	2 Pkt	3.84 Pcnt	82 Pcnt
1780582361	23 Pkt	100 Pkt	3 Pkt	3.84 Pcnt	82 Pcnt
1780582061	23 Pkt	90 Pkt	1 Pkt	3.83 Pcnt	82 Pcnt
1780582002	22 Pkt	90 Pkt	1 Pkt	3.83 Pcnt	82 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)